MICRO DEEP-WELL PUMP
MODEL NO.MB02
MODEL NO.MB10
OPERATION AND MAINTENANCE
Adjust the flow control valve for water output and place the pump in water. Turn on the power supply by putting the plug in place. Adjust the valve for water output again to get suitable water flow.
Inspect and wash the pump once a month.
When washing the pump, turn off power, then remove the water pipe, take out the impeller and rotor,also wash the rotor chamber, the impeller and rotor without using any agent or detergent.
Re-assemble the parts in reverse order, and put the pump in the water, then plug in the power supply cord so as to have the pump operated continuously.
Before operation, please read the instruction manual carefully. Don't wet the power supply to avoid electric shock.
Please put it on dry location.
Put the pump into water completely, do not let the pump run dry so as to prevent the pump from being over heated and damaged.
Avoid the power supply and the power supply cord from getting wet, A "DRIP LOOP" should be arranged by the user for each cord to prevent water travelling along the cord and coming in contact with the receptacle. The "DRIP LOOP" is that part of the cord below the level of the receptacle.
The power supply cord should not be over-twisted, or pulled tightly to prevent damage to the conductor.
Don't lift the Miro-pump by the cord.
CORRELATIVE SUBJECT
MODEL NO.MB10
NO.MB02:INSTRUCTION MANUAL
FEATURE
FEATURE:SPECIFICATION |  |
ABSTRACT
The product is micro deep-well pump.
Adopt permanent magnetic rotor and synchronous motor.The micro aqua pump is operated with a power supply of the low voltage, the pump can be operated in a reliable safe condition without electric shock to the user.
The product has the features of small volume, having a high lift and a large water flow.
The product can be used for water circulation for fish tank, water stream for artificial scenery, water fall,water fountain etc. |